Skip to content
YouTubeFacebookTikTokInstagram

How to Add and Style Section Subtitles

A subtitle is the line under a section’s title, such as a numbered chapter type’s name under “Chapter 1”. Add one when you rename the section, style every subtitle in the Heading Subtitle panel, and give some sections their own look with a preset.

How to add or remove a subtitle on a section

  1. Click Rename at the top of the section.

  2. Type the subtitle in the subtitle box, then click Save.

To remove a subtitle, clear the subtitle box and click Save. Right-clicking the section in the sidebar and choosing Rename opens the same two boxes, Title and Subtitle.

To keep a subtitle but leave it off the page, open the section’s Options › Customize Section Settings › Display and turn off Show Subtitle in Header.

Chapter Types shows this on a numbered chapter type, where the subtitle carries the chapter’s name.

How to style section subtitles

Every subtitle is styled in the Heading Subtitle panel. Open it any of these ways:

From Choose
Options menuOptions › Section Heading Styles › Heading Subtitle
Edit StylesEdit Styles › Heading Subtitle, under Section Heading Settings
E-reader previewHover the section’s heading and click Subtitle

The panel edits the preset of the section you have open: Default, your book-wide subtitle look, until you give that section a preset of its own. Its settings are on four tabs; click Apply to save them. The Title Page and Full Page Image section types have no Section Heading Styles.

Text

Setting To
FontChoose the typeface.
SizeSet the size, in points.
Letter SpacingTighten or loosen the space between letters.
WeightSet how heavy the letters are. Italic beside it sets the subtitle in italics.
TransformNone, CAPS, lower or Capitalize, and small caps when the font has them.

Colors

Setting To
Enable ColorsTurn on the settings below.
Text ColorColor the subtitle. Inherit from Body keeps your text color.
Background ColorPut a colored band behind it. Transparent means no band.
WidthFull Width runs the band across the page; Around Text hugs the subtitle.
Spacing Around TextSet the room inside the band, around the subtitle.

Underline

Setting To
Show UnderlineDraw a line under the subtitle.
StyleSolid, Dashed, Dotted or Double.
ThicknessSet the line’s thickness.
ColorColor the line. Default follows your print Border color, and prints black when none is set.
Width ModeText Width matches the subtitle; Custom sets a Width in percent.
Distance from TextSet the gap between the subtitle and its line.

Position & Spacing

Setting To
AlignmentSet the subtitle left, centered or right.
Spacing around SubtitleSet the space outside the subtitle: all four sides together, in pairs (Top & Bottom, Left & Right), or each side alone.

How to use presets for section subtitles

Every section’s subtitle uses Default, your book-wide subtitle style, until you give it another. To style some subtitles differently, make a preset: a named subtitle style that any section can use. Change the preset later, and every section using it changes with it.

A preset lives in a group. Put your subtitle preset in the same group as your section title preset, such as Elegant, and the two make one look.

Make a preset for a section subtitle

Make a preset for a section subtitle
  1. Open the section, then its Options menu. Choose Section Heading Styles, then Heading Subtitle. The Preset box shows Default.

  2. Click the … button beside Preset and choose Create New Preset.

  3. Choose a group for it, such as Elegant, and click Create in Elegant. Or click Create a new group, type a name, and click Create Group and Preset. The panel now edits your new preset.

  4. Style it in the panel’s tabs.

  5. Click Apply. The section’s subtitle now uses your preset.

A new preset starts from Lacuna’s standard subtitle look, not from your Default, so check its size and spacing before you apply.

Choose a preset for a section subtitle

Choose a preset for a section subtitle
  1. Open the section’s Options menu, then Section Heading Styles, then Heading Subtitle.

  2. Choose a preset in the Preset box. A Switched from badge shows the change is not saved yet.

  3. Click Apply.

A green dot beside Heading Subtitle in the menu means the section uses a preset of its own.

Copy a section subtitle preset to other sections

Copy a section subtitle preset to other sections
  1. Open Heading Subtitle for a section that uses the preset.

  2. Click Apply to Others.

  3. Leave Subtitle Style ticked under Settings to Apply: it is ticked when the window opens. Tick Title Style too to copy the section’s title preset with it.

  4. Tick the sections under Sections to Apply To, then click Apply.

Apply to Others stays grey while this section’s subtitle is on the Default preset, or while a preset change is unsaved. Point at it to see why.

How to start a new line in a section subtitle

{break} works in a subtitle the same way as in a title: type it in the subtitle box where the new line starts. See how to start a new line in a section title.

In Print Settings › Page Layouts, drag Section Subtitle from Page Elements into a header or footer area. A section with no subtitle leaves that spot empty, and a {break} reads as a space. See How to choose what your headers and footers show.

Questions

How do I add a subtitle to a chapter?

Click Rename at the top of the chapter, type the subtitle in the subtitle box, and click Save.

Why didn’t my change reach every subtitle?

Heading Subtitle changes the preset of the section you have open. Sections on another preset keep theirs: open one of them to change that preset, or copy your preset to them.