How to Change One Section’s Print Settings
Every section can print differently from the rest of your book: start on a right-hand page, print without headers and footers, hide its title, or use its own font. Open the section, click Options at the top right and choose Customize Print Settings.
These settings change your print-ready PDF. Your EPUB keeps the book-wide look.
How to open a section’s print settings
-
Open the section, click Options at the top right and choose Customize Print Settings.
-
Open a tab, change a setting, and click Apply.
| Tab | What it changes |
|---|---|
| Page Start | The side it starts on, and white-on-black colors for its first page. |
| Headers & Footers | Its header and footer presets, hiding them on its first page or every page, its page numbers and borders. |
| Content | Hiding its title, subtitle or heading image in print, and its own widows and orphans. |
| Typography | Its own body font, weight, size and line spacing. |
A blue asterisk on a tab or a row marks a setting this section sets differently from your book. Under the panel’s title, Section: names the section it belongs to.
How to start your section on the right-hand page in print
-
Open Options › Customize Print Settings. The panel opens on Page Start.
-
Set Start Page Side and click Apply.
| Choose | To |
|---|---|
| Default | Follow your book: see how to start chapters on a right-hand page. |
| Recto (Right-hand page) | Start on a right-hand page. Lacuna adds a blank page before it when it needs one. |
| Verso (Left-hand page) | Start on a left-hand page, the same way. |
To start every chapter type on a right-hand page, use Chapter Type Options instead. A section’s own Start Page Side comes first.
How to print your section’s first page in white on black
-
On Page Start, turn on Invert First Page Colors.
-
Click Apply.
Only the section’s first page changes. For other colors, or for every page of the section, use print page colors.
How to hide headers and footers on every page of your section
The first page of every section hides its headers and footers unless you change it. To hide them on the rest of its pages too:
-
Open the Headers & Footers tab.
-
Under All Headers & Footers, turn on Disable on All Pages and click Apply.
Page numbers and borders go with them, so their rows leave the tab.
| Setting | What it does |
|---|---|
| First Page | Under Page Layout Preset: the header and footer preset for its first page. That page shows it only when it shows headers, footers or page numbers. |
| Other Pages | The preset for the rest of its pages. |
| Disable on First Page | Under All Headers & Footers: hides them on its first page. On when you start. |
| Disable on All Pages | Hides them on every page of it, page numbers and borders included. |
| Show on First Page | Under Page Numbers: prints the page number on its first page while the rest of its header and footer stays hidden. |
| Show on All Pages | Prints the page number on every page of it, even where headers and footers are hidden. |
| Disable on First Page / Disable on All Pages | Under Borders: hides the header and footer lines on its first page, or on every page. |
To give the section a different header and footer layout, choose a preset for First Page or Other Pages: see how to give one section different headers and footers.
How to change page numbers for one section
-
On Headers & Footers, under Page Numbers, turn on Show on First Page or Show on All Pages.
-
Click Apply.
Show on First Page prints the number on the section’s first page while the rest of its header and footer stays hidden. Show on All Pages prints it on every page, even where headers and footers are hidden. Where page 1 falls, and Roman numerals, are set for the whole book in page numbering.
How to hide your section’s title in print
-
Open the Content tab.
-
Under Heading Suppression, turn on Hide Title, Hide Subtitle or Hide Image, and click Apply.
| Setting | What it does |
|---|---|
| Hide Title | Under Heading Suppression: prints the section without its title. |
| Hide Subtitle | Prints it without its subtitle. |
| Hide Image | Prints it without its heading image. |
| Override Widows & Orphans | Under Pagination: gives it its own Widows and Orphans, in lines (0 to 6). |
To hide the title in your e-book as well, use Show Title in Header in Customize Section Settings: see how to show a hidden section title.
How to set widows and orphans for one section
-
On Content, under Pagination, turn on Override Widows & Orphans.
-
Set Widows and Orphans, in lines, and click Apply.
They start at your book’s values. Orphans is the fewest lines of a paragraph that may sit at the foot of a page, Widows the fewest that may carry over to the top of the next: see widows and orphans for the whole book.
How to give your section its own body font
-
Open the Typography tab and turn on Enable Body Text Override.
-
Set Font, Weight, Size and Line Spacing, and click Apply.
| Setting | What it does |
|---|---|
| Enable Body Text Override | Turns the section’s own body text on. Off, it uses your book’s body text. |
| Font | Its body font, from the same list as your book’s. Choosing a font sets Weight back to regular. |
| Weight | How heavy its paragraphs print. |
| Size | Its text size, 6 to 50 pt. |
| Line Spacing | The space between its lines, 1.0 to 2.5 times the text size. |
The font reaches everything in the section that has no font of its own. The size and line spacing apply to its paragraphs.
How to copy your section’s print settings to other sections
-
Click Apply to Other Sections at the foot of the panel.
-
Click Changed to tick what you changed here, tick the sections, and click Apply.
It works the same way as in Section Settings: watch it in how to copy your section’s changes to other sections.
How to go back to the book’s settings
Click Reset to Defaults at the foot of the panel, click Reset settings, then click Apply. To put back one setting, set it to Default or turn its switch off. The history buttons at the bottom of the panel undo either.
Questions
Should my chapters start on a right-hand page?
Printed books open the first chapter on a right-hand page, and many open every chapter there. Lacuna starts only the first chapter on a right-hand page unless you turn on All chapters start on a right-hand page in Chapter Type Options. For one section, set its Start Page Side.
Why is there a blank page before my section?
Its Start Page Side is Recto or Verso, or your chapter types start on a right-hand page, and the section would have landed on the other side. Lacuna adds a blank page to get there. Set Start Page Side to Default to let it start on either side.
Why does my chapter’s first page still show its headers and footers?
Because Hide all headers and footers is off in Print Settings › Section Type Options, and that switch decides for every chapter type. A chapter’s own Disable on First Page can show its first page’s headers and footers, but not hide them. Turn the book-wide switch back on: see chapter openings and front matter.
Can one section use a different font?
Yes. Open its Options › Customize Print Settings › Typography, turn on Enable Body Text Override and choose the font. Your print-ready PDF changes; your e-book keeps your book’s font.
How do I remove orphan lines?
For your whole book, set Orphans and Widows in Print Settings › Widows & Orphans: see widows and orphans. For one section, turn on Override Widows & Orphans on its Content tab and set them there.